User's Manual
Table Of Contents
- T-BERD ⁄ MTS 5800 Handheld Network Test Family Getting Started Manual
- Contents
- About this Manual
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 System Tools
- Chapter 4 Basic Testing
- Chapter 5 Optical Tools
- Chapter 6 Maintenance and Troubleshooting
- Appendix A Specifications
- Physical specifications
- Power specifications
- Supported electrical Ethernet rates
- Clock source (Timing) specifications
- DS1 specifications
- E1 specifications
- E3/DS3/STS-1 specifications
- E4/STM-1e specifications
- SFP specifications
- XFP specifications
- Optical specifications
- Transceiver specifications
- Environmental specifications
- Appendix B Storage and Shipment
- Appendix C Customer Services
- Glossary
Appendix A Specifications
E4/STM-1e specifications
T-BERD/MTS 5800 Getting Started Manual
121
Transmitter
(STM-1e
circuits)
Table 32 lists specifications for the transmitter when running
STM-1e applications.
Physical
measurements
(STM-1e
circuits)
Table 33 lists frequency and level measurement specifica-
tions when running STM-1e applications.
Table 32 STM-1e transmitter specifications
Parameter Specification
Connector One BNC
Bit rate 155.52 Mbps
Line coding CMI
Tx clock
(Timing)
– Internal reference clock with accuracy ±1.5 ppm, ±1 ppm
per year aging
– Recovered from Rx1
– External from BITS, SETS, or CLOCK
Frequency offset ±50 ppm, in 1 ppm steps
Pulse Nominal 1.0 Vpp Complies with ITU-T G.703 (11/01)
Impedance Nominal 75 Ω
Table 33 STM-1e frequency and level measurement specifications
Parameter Specification
Tx and Rx
Frequency
– Range: 155.52 MHz ±50 ppm
– Accuracy: ±1.5 ppm, ±1 ppm per year aging
– Resolution: 1 Hz or 1 ppm
Level Vpp – Range: 1.4 V to 0.01 V
– Resolution: 0.01 V
– Accuracy: ±0.02 V ±10%