User's Manual

Appendix B Storage and Shipment
Storing the instrument
126 T-BERD/MTS 5800 Getting Started Manual
Storing the instrument
When the instrument is not in use, it can be stored. You should
follow the criteria below when storing the Handheld Network
Test Family.
Environmental
specifications
The T-BERD ⁄ MTS 5800 should be stored according to the
environmental specifications listed in Table 38.
Other
environmental
limitations
The battery discharges slowly while in the instrument.
Continued storage while in a discharged state could result in
performance degradation. For this reason, JDSU recom-
mends removing the battery if the instrument will not be used
for more than a week. Store the battery in a cool, dry, clean
environment. Do not leave the battery in a car or truck, partic-
ularly during extremely warm weather.
While out of the instrument, the battery will discharge at a slow
rate. JDSU recommends checking the battery periodically
while it is in storage, and keeping it charged to at least 40%.
For additional information about maintaining the battery, see
“Maintaining the battery” on page 90.
The first time you use the instrument after prolonged storage,
use the AC adapter to power up the unit.
Table 38 Environmental specifications for storage
Item Description
Storage Temperature -4° F to 140° F (-20° C to +60° C)
Humidity at 86° F (30° C) 0% to 95% relative humidity,
non-condensing