User's Manual
Table Of Contents
- T-BERD ⁄ MTS 5800 Handheld Network Test Family Getting Started Manual
- Contents
- About this Manual
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 System Tools
- Chapter 4 Basic Testing
- Chapter 5 Optical Tools
- Chapter 6 Maintenance and Troubleshooting
- Appendix A Specifications
- Physical specifications
- Power specifications
- Supported electrical Ethernet rates
- Clock source (Timing) specifications
- DS1 specifications
- E1 specifications
- E3/DS3/STS-1 specifications
- E4/STM-1e specifications
- SFP specifications
- XFP specifications
- Optical specifications
- Transceiver specifications
- Environmental specifications
- Appendix B Storage and Shipment
- Appendix C Customer Services
- Glossary
About this Manual
Conventions
T-BERD/MTS 5800 Getting Started Manual
xvii
Use this manual in conjunction with the following manuals:
–The Ethernet, IP and TCP/UDP, Testing Manual provides
detailed instructions for testing on each of the listed
networks. It also explains how to run key scripts and
describes each of the available test results.
–The PDH, SONET, SDH and Next Gen Testing Manual
provides detailed instructions for testing on each of the
listed networks.
– Help. The topics addressed in the testing manuals are
also available on the T-BERD ⁄ MTS 5800 in an HTML
format.
Conventions
This manual uses conventions and symbols, as described in
the following tables.
Table 1 Typographical conventions
Description Example
User interface actions and buttons or
switches you have to press appear in
this typeface.
Press the OK key.
Code and output messages appear in
this typeface.
All results okay
Text you must type exactly as shown
appears in this typeface.
Type: a:\set.exe in the dialog box.
Variables appear in this typeface. Type the new hostname.
Book references appear in this typeface. Refer to Newton’s Telecom Dictionary