User's Manual

Chapter 2 Getting Started
Navigating the user interface
20 T-BERD/MTS 5800 Getting Started Manual
Test tab The current test tab appears near the menu bar of the Main
screen (as shown in Figure 7). When multiple tests are
running, two tabs appear. Clicking on the tab takes you to that
test. For more information on multiple tests, see “Running
multiple tests” on page 61.
VNC icon Indicates that someone has a remote connection to the unit
using VNC.
Test status The test status of the currently selected test is displayed in the
upper right. Icons similar to a DVD or audio player indicate the
status: the “Play” icon indicates a test is running; “Pause”
appears when running a delayed-start timed test and the test
has not started yet, and “Stop” appears when the test is
stopped.
Incoming power
level
Indicates the power level of the incoming signal.
Application
buttons
The buttons located on the right side of the screen allow
access to the setup screens, restart tests, and perform other
functions specific to your test application.
Figure 7 Test tab
Figure 8 Test running and elapsed time