User's Manual

Chapter 2 Getting Started
Setting up the instrument
T-BERD/MTS 5800 Getting Started Manual
27
Specifying
international
settings
Before testing, you can specify the language and the date and
time format for the user interface.
To specify international settings
1 Select the SYSTEM icon.
The System screen appears.
2 Select Region.
The System Setup screen appears, listing settings that
control the appearance and behavior of your unit.
3 In the Language box, select the language for the user
interface.
The formatting standard changes automatically.
In the Samples for selected formatting box, the date,
time, and number formatting appear.
4 If you want to change the formatting standard, click the
Change formatting standard box, and then select a
country.
5 If you wish to do so, click the check box next to Use 24-
hour time.
6 Turn the instrument off then back on.
The user interface changes to the language you specified.
Setting the date
and time
The T-BERD ⁄ MTS 5800 has an internal clock that you can
set to provide accurate time stamps for test results.
To set the date and time
1 Select the SYSTEM icon.
2 Select Date and Time.
3 Specify the Region, Country, and Area, and if you wish
to do so, click the check box for Automatically adjust for
daylight savings time.