User's Manual

Chapter 4 Basic Testing
Step 2: Configuring a test
T-BERD/MTS 5800 Getting Started Manual
49
The setup page appears and typically includes a series of
tabs. The tabs vary based on the test application you
selected. See Figure 20
.
3 To navigate to a different setup page, select the corre-
sponding tab at the top of the screen. For example, to
display the Traffic setup page, select the Traffic tab.
4 After you finish specifying the test settings (see “Entering
data in the setup fields” on page 50), select the Results
button to return to the Main screen.
Figure 20 Setup page (Ethernet settings tab for L4 testing)
TIP:
If you want to provide a screen shot of a configuration tab
(for example, to capture the settings that you specified on
the tab), on the Main screen, select
Tools > Take Screenshot. A screen shot will be captured
and stored as a PNG file in the /Disk/images folder. You
can include the screen shot when you create reports.