User's Manual

Chapter 4 Basic Testing
Step 2: Configuring a test
50 T-BERD/MTS 5800 Getting Started Manual
Entering data in
the setup fields
When specifying test settings, you can select a value from a
drop-down menu, select a radio button, or tap the field to
launch a keypad, then type a value.
To select a value from a drop-down menu
– Select the field, and then highlight the value for the
setting.
To type text or numeric values
– Select the field to launch a keypad, type the value, and
then select OK.
The value appears in the field.
Saving setups After you specify your test settings, you can save the setup
(configuration) to use it again for future tests.
To save a setup (configuration)
1 On the menu bar of the Main screen, select
Test > Save Test Config As...
The Save Test Configuration screen appears, listing
existing saved setup files.
2 To save using the default name, go to step 6. To change
the file name, select the filename.
The File Name dialog box appears.
3 Select the filename field.
A keyboard appears on the screen.
NOTE:
The valid ranges and values for user-specified settings
appear at the top of the keypad. For example, if you config-
ure a constant traffic load for a 10 GigE LAN circuit, 0.001
.. 100.000 appears at the top of the keypad, indicating
that a number ranging from 0.001 to 100.000 is a valid
value for the load percentage.