User's Manual

Chapter 4 Basic Testing
Step 3: Connecting the instrument to the circuit
T-BERD/MTS 5800 Getting Started Manual
51
4 Use the keyboard to type a name for the saved setup file.
You do not need to enter the .tst extension; the instru-
ment automatically appends the extension to the name.
5 If you want to secure the setup so other technicians can
not modify it (or delete it using the Delete All button),
select Save as read-only.
If you indicate that you want to save a configuration
(setup) as read-only, the following occurs:
– The configuration can not be deleted using the Delete
All button.
– The configuration can be deleted using the Delete
button.
– When you import a read-only configuration file onto
your instrument, the instrument will retain the read-
only permissions. Any custom categories defined for
the configuration will also be imported.
– Any custom result categories defined for the configura-
tion are also protected.
6 Select the Save button.
7 To return to the Main screen, select the Exit button.
The setup is saved and the file appears on the screen with the
other saved setups.
Step 3: Connecting the instrument to the circuit
For detailed instructions on connecting your instrument to the
circuit, refer to the appropriate testing manual for the circuit
you are testing.
When connecting the unit to optical circuits, bear in mind that
applied power must not exceed the power level specified on
the panel for each optical connector.