User's Manual
Table Of Contents
- T-BERD ⁄ MTS 5800 Handheld Network Test Family Getting Started Manual
- Contents
- About this Manual
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 System Tools
- Chapter 4 Basic Testing
- Chapter 5 Optical Tools
- Chapter 6 Maintenance and Troubleshooting
- Appendix A Specifications
- Physical specifications
- Power specifications
- Supported electrical Ethernet rates
- Clock source (Timing) specifications
- DS1 specifications
- E1 specifications
- E3/DS3/STS-1 specifications
- E4/STM-1e specifications
- SFP specifications
- XFP specifications
- Optical specifications
- Transceiver specifications
- Environmental specifications
- Appendix B Storage and Shipment
- Appendix C Customer Services
- Glossary
Chapter 4 Basic Testing
Step 5: Viewing test results
T-BERD/MTS 5800 Getting Started Manual
55
For descriptions of each result, refer to the testing manual for
the technology you are testing.
Expanding and
collapsing
result
measurements
Certain test results for which a variety of measurements are
made (such as current, average, minimum, or peak
throughput measurements) can now be expanded (to see all
measurements for the test result), or collapsed (to hide
measurements for the test result). When multiple measure-
ments exist for a result, a plus or minus sign appears to the
right of the result name.
Collapsing the results that you are not interested in reduces
scrolling, and allows you to observe more results that you are
interested in simultaneously.
To expand result measurements
– Select the plus sign to the right of the result name, or
– Select the plus sign at the bottom or the result window to
expand all expandable results.
To collapse result measurements
– Select the minus sign to the right of the result name, or
– Select the minus sign at the bottom or the result window
to collapse all collapsible results.
Changing the
result layout
You can change the default layout of the test results on the
Main screen. In many instances, it is helpful to use the Single
layout.
TIP:
If you want to provide a screen shot of key test results, on
the Main screen, select Tools > Take Screenshot. A screen
shot will be captured and stored as a PNG file in the /Disk/
images folder. You can include the screen shot when you
create reports.