User's Manual

Chapter 4 Basic Testing
Step 5: Viewing test results
T-BERD/MTS 5800 Getting Started Manual
57
To view a histogram
1 Set one of your result groups to Summary, and then select
the Histogram category.
The Histogram display appears.
2 You can modify the default display as follows:
– To view the complete histogram, select Single result
window (see “Changing the result layout” on page 55).
– To scroll horizontally through the display, use the
arrow keys at the top of the pane.
– To change the histogram interval, select the interval
drop down (illustrated as “Sec” in Figure 22), and then
select the new interval (Min, Hour, or Day).
Viewing an
event log
An event log is a display listing any errors, anomalies,
alarms, or defects that occur during the course of your test.
The log displays the value for each event, and provides the
date and time that the event occurred.
The event log and histogram are alternative views of each
other. They contain the same data. The event logs displays it
all as a table, and only lists errors (anomalies) and alarms
Figure 22 Histogram display (Single result window)