User's Manual

Chapter 4 Basic Testing
Creating reports
70 T-BERD/MTS 5800 Getting Started Manual
2 To specify information about the device you are currently
testing, select the Device Under Test tab (if it isn’t
already displayed), and then use the keypads provided to
type the following:
– Owner (represents the owner of the device).
– Device Under Test (represents the name or model of
the device).
– Software Revision (represents the software revision
the device is currently running).
– Serial Number.
–Comment.
3 If you want to specify additional comments concerning
test results or the tester, select the Tester Comments
tab, and use the keypads provided to type additional infor-
mation.
4 If you want to change the default name for your Handheld
Network Test Family as provided in the report, select the
Test Instrument tab, and then type the revised model
name.
5 Select Ok to store the report details and return to the Main
Screen.
Report details are specified.
Creating a
report
You can create reports in a PDF, CSV, Text, HTML, or XML
format. Before creating a report, you can choose the type of
content to include in the report. For example, you can include
the details you specified as the User Info, select specific
configuration groups (corresponding to the information that
you specified on the setup tabs), and select key result groups
that you want to review in detail.
You can also indicate whether you want to include captured
screen shots in the report.