MSDS

care.
5 Fire-fighting measures
• Suitable extinguishing agents:
Use fire extinguishing methods suitable to surrounding
conditions.
foam, CO2, powder extinguisher, water haze, water spray jet.
• Special hazards caused by the substance, its products of
combustion or resulting gases:
As a layer most dust by the action of a flame will melt while
self supporting spread of burning occurs with smoky flames.
Exposure to decomposition products may cause a health hazard.
• Protective equipment:
In case of fire do not breathe fumes.
Appropriate breathing apparatus may be required.
6 Accidental release measures
• Person-related safety precautions:
Avoid formation of dust.
Ensure adequate ventilation
Refer to protective measures listed in sections 7 and 8.
• Measures for environmental protection:
Pick-up and arrange disposal without creating dust.
Disposal at an appropriate repository.
• Measures for cleaning/collecting:
Contain and collect spillage with a vacuum cleaner or by wet
brushing and place in container for disposal according to local
regulations. (See section 13).
Do not use a dry brush as dust clouds can be created.
7 Handling and storage
• Handling:
• Information for safe handling:
Normal precautions taken when handling chemicals should be
observed.
Suction ventilation required during spraying.
Comply with the health and safety at work laws.
• Information about fire - and explosion protection: