User's Manual

1080P/WIFI ACTION CAMERA
Operation Manual
FCC ID: 2AI5C
MADE IN CHINA
Thank you for purchasing the Vibe HD 1080P/WIFI Action Camera.
Before use, please carefully read this Operation Manual for optimal
performance and longer product life. Retain this manual for future use
and reference.
*Due to technological updates, the images used in this manual may be
updated based on manufacturer’s discretion without notification.
PACKAGE CONTENTS
• 1080P/WIFI Action Camera
• Standard Case
• Waterproof Case
• Handlebar / Pole Mount
• Swivel Adapter
• Pivot Adapter
• USB Charging Cable
KEY FEATURES
• 1080P Videos
• WIFI Control
• 16 Megapixel Resolution
• 2’ LCD Display
• Built-in rechargeable battery
SAFETY INSTRUCTIONS
Keep the unit away from heat sources, direct sunlight, humidity, water and
any other liquids.
Do not operate the unit of it has been exposed to water, moisture or any
other liquids to prevent against electric shock, explosion and/or injury to
yourself and damage to the unit.
Do not use the unit if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified
electrician. Improper repairs may place the user at serious risk.
Do not puncture or harm the exterior surface of the product in any way.
Keep the unit free from dust, lint, etc.
Do not use this unit for anything other than its intended use or purpose.
Doing so may damage the unit.
This product is not a toy. Keep out of reach of children.
Do not expose batteries, battery pack, or batteries to installed to excessive
heat, such as direct sunlight, or open flame.
ACTION CAMERA DIAGRAM
an on-screen red battery icon.
TURNING THE ACTION CAMERA ON/OFF
Power On: Press and hold the Power/Mode button for 3 seconds then
release this button .
Power Off: Press and hold the Power/Mode button.
*The unit will automatically turn off after 3 minutes when not in use.
USING THE ACTION CAMERA
1. Ensure the unit is fully charged and in Off Mode.
2. Insert a Micro SD or Micro SDHC card into the Micro SD card slot.
*Only insert/remove your Micro SD or Micro SDHC card when the
unit is turned off.
3. Turn on the unit, the camera will automatically enter video mode. You
may start video recording or change to other modes.
4. To switch modes, press the Power/Mode Button to switch between five
modes: Video, Photo, Playback and Setup.
RECORDING VIDEOS
When the Action Camera is turned on, it will automatically start up in video
mode and begin recording a video. You may also enter video mode from
the setup screen. Once selected, you will see the video preview screen. In
order to use different video features, you must enter the setup screen and
select from the options. You can chose Resolution, Motion Detection,
Video Lapse, Record Cycle, Audio Recording and Date Stamp.
To start video recording, aim the camera lens in the direction you would
like to record and press the Shutter Button once. Both the date and
recording time will appear red at the top of the display and the LED
indicator will flash. This will indicate that video recording is in process. To stop
video recording, press the Shutter Button once while video recording. The
display will revert back to the video preview screen.
*If the memory card is full or the battery is low, video recording will
automatically stop.
Video Preview Screen Diagram
1. Video Mode Icon
2. Elapsed Recording time
3. Video Resolution
4. Record Cycle
5. Microphone On/Off
6. Battery Level Indicator
7. Date and Time Stamp
TAKING PHOTOS
You can start taking photos when you switch to photo mode. In order to
use different photo features, you must enter the setup screen and select
from the options. You can chose Exposure, Image Size, Quality, Timer,
Sharpness, ISO, Anti-Shaking and White Balance.
Cycle through the modes until you see the photo preview screen.
To capture photos, aim the camera lens in the direction you would like to
capture. Press the Shutter button once to take one picture. Repeat this
process for each picture you would like to capture. A shutter noise will
sound when a picture is captured.
Photo Preview Screen Diagram
1. Photo Mode Icon
2. Photo Size
3. Battery Level Indicator
4. Memory Card Capacity
For Photo Quantity
PLAYBACK MODE
Enter playback mode by cycling through the modes. Once selected, you
will see the file selection screen below. Press the up and down selection
buttons to cycle through photos and videos.
Playback Screen Diagram
1. Playback Mode Icon
2. Photo/Video Number
3. Battery Level Indicator
4. Play (videos only)
Photo Playback Functions
To delete a photo, select the photo press the mode/power button to
setting mode, press down to delete function, you can choose delete
current photo or all file.
Video Playback Functions
To view a video, press the select button when you see the video you want
to play, You can use the select button to pause and resume the video.
Press and hold the up button to rewind the video. Press and hold the down
button to fast forward the video. Press the mode button to exit the video.
To delete a video, first select the video and then press the mode button to
enter setting. Locate the delete button on page 5. Press the select button
and choose weather to delete curent selection or all media and press the
select button on that option.
SETTINGS
Enter setup by cycling through the modes. Once selected, you will see the
list of setup options as shown below, there are 6 pages.
1 2 3 4
5
76 8 9
10 11
• Buckle Adapter
• Helmet / Wrist Mount
• Helmet / Wrist Straps
• Adhesive Replacements
• Operation Manual
• Removable Battery
• Micro SD expandable storage
up to 32GB
• 140° wide angle lens
• Built-in Mic
ACCESSORIES MOUNTING THE ACTION CAMERA
Insert the Action Camera into either the Standard Case or Waterproof
Case. The Swivel Adapter must then be screwed into the Standard Case.
They you may attach the chosen case to the mount of your choice.
Once mounted these can be connect to a variety of action camera
accessories like the one included Handlebar Mount, Pivot Adapter and
Buckle Adapter/Helmet Mount.
Use the Handlebar Mount on a bike or scooter to use the Action Camera
while riding. Unscrew the knobs on the bottom of the Handlebar mount
and adjust the locking system to t around any handlebar. Tighten the
knobs to secure in place. Ensure all screws are tightly secured before using
your camera in action.
Use the Buckle Adapter and Helmet/Wrist Mount with the included straps to
suit whatever purpose you need it for like winter or summer sports.
ACTION CAMERA SPECIFICATIONS
• Image Resolution: Up to 16 megapixels
• Video Resolution: 1920x1080P @ 30fps / 1280x720P @ 30fps
• Image / Video File Format: JPG /AVI
• Android and iOS compatible
• Lens: 140° HD wide-angle lens
• Memory: Micro SD / SDHC card compatible up to 32 GB*
• Play Time: Up to 60 min @ 1080P
• Battery: 900 mAh lithium-ion
• Charge Time: Up to 2 hours
• Charging Interface: Micro USB
• Dimensions: 59x30x40mm
*UHS (ultra high speed) cards are not compatible, as they are not 100%
backward compatible. High speed cards Class 6 or above are
recommended. When using professional video mode, Class 10 is required.
CHARGING THE ACTION CAMERA
It is recommended to fully charge the camera before using it for the first
time. Only use the supplied USB cable.
Connect the USB plug to a computer USB port and the Micro USB plug to
the charging port of the unit. The Charging Indicator will illuminate while the
unit is charging.
A full charge of the battery may take up to 3.5 hours. When the battery is
fully charged, the Charging Indicator will turn off. The unit is ready for use.
Please charge the unit when the battery levels are low. This is indicated by
1
7
2 3 4 5 6
Power / Mode
Button
Up/Wifi
Selection
Down
Selection
Removable
Battery
Wide Angle
HD Lens
Video Mode Photo Mode
Playback Mode Setup/Settings
1
4
2 3
DOWNLOADING THE SMART PHONE APP
The action camera is compatible with the GoPlus Cam App, which is
available on both Apple and Android devices. The GoPlus Cam App
allows you to control the action camera and provides a live-stream via
WiFi.
To download the App, search for “GoPlus Cam” in the App Store or
Google Play Store and click install. Alternatively, you can scan the
appropriate QR Code below.
Connect The Camera
Make sure to power on the camera first and enable the WiFi by pressing
the Up button. The screen will show the camera’s WiFi name and
password.
In your smart phone or tablet’s WiFi settings, connect to the corresponding
network that matches the camera’s screen. The network name typically is
“VE-IFXAC” followed by a series of numbers. When prompted, enter the
password “123456” which should also match your camera’s screen.
Open the GoPlus Cam app on your smart phone or tablet. Once open,
press connect where it shows the camera icon.
Once connected you can change modes and settings from your smart
phone or tablet as well as view and download your photos and videos.
CARE AND MAINTENANCE
• Do not expose the unit to liquid, moisture, or humidity to avoid
damage to the product's internal circuitry.
• Do not use abrasive cleaning solvents to clean the unit.
• Do not expose the unit to extremely high or low temperatures as this
will shorten the life of the electronic unit, destroy the battery, and/or
distort certain plastic parts.
• Do not dispose of the unit in fire as they may explode or combust.
• Do not expose the unit to contact with sharp objects as this will cause
scratches and damage.
• Do not let the unit fall from high places, as doing so may damage the
internal circuitry.
• Do not attempt to disassemble the unit.
In the event that the unit does not function properly, return it to the store
where it was purchased.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Please note that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
App Store
Download
Google Play Store
Download
Operating System Requirements
Android
Apple
Android 4 and up (Quad Core)
iOS 9 and up
(iPhone 6 and Up)
(iPad Air)
(iPad Mini)
* Compatibility varies by device. Content playback, sharing
and access to the camera’s memory card might not be
available on some devices.
Shutter / Select
Button
Micro SD
Card Port
Micro USB
Charge Port
LCD
Screen
LED
Indicator
Waterproof Case Handlebar / Pole Mount
Helmet/Wrist Straps Adhesive Replacements
Standard Case
Swivel Adapter
Buckle Adapter
USB Cable
Helmet/Wrist Mount
Removable Battery
Pivot Adapter
User Manual
1
4
2 3
Anti-Shaking Turn anti-shaking On/Off
Frequency Adjust video frequency - 50HZ / 60HZ
OSD Mode
(on screen display)
Turn OSD mode On/Off
Screen Saver
Rotate Turn rotate On/Off
Auto Power Off
Language
Date / Time
TV Switch
Car Mode
WIFI SSID
WIFI Password
Delete
Format
Default Setting
Version
TV Format
White Balance
Quality
Capture Mode
Sharpness
ISO
Set photo/video quality to
Fine/Normal/Economy
Adjust photo self-timer - Off / 3 sec /
5 sec / 10 sec / 20 sec
Adjust sharpness - strong / normal / soft
Adjust ISO - Auto / 100 / 200
Image Size
Adjust photo resolution - 16M/12M/10M/
8M/5M/3M/2M/1.3M/VGA
Beep Sound Turn beep sound On/Off
Adjust white balance - Auto / daylight /
cloudy / tungsten / fluorescent
Adjust screen saver - off / 1min / 2min / 3min
Adjust auto power off -
off / 3min / 5min / 10min
Adjust language - English / Chinese /
Japanese / French / Deutsch / Thai / Italian /
Portuguese / Polish / Spanish / Russian
Adjust date format -
MM/DD/YY , YY/MM/DD , DD/MM/YY
Turn TV switch On/Off
Turn car mode On/Off
VE-IFXAC
123456
Current / All
Cancel / OK
Cancel / OK
Firmware
NTSC/PAL
Settings Function
Resolution
Exposure
Cyclic Record
(loop recording)
Video Lapse
WDR (wide
dynamic range)
Record Audio
Date Stamp
Motion Detection
Turn motion detection On/Off
Adjust length of time-lapse videos - 1 sec /
2 sec / 5 sec / 10 sec / 30 sec / 1 min
Turn wide dynamic range On/Off
Turn audio recording On/Off
Turn the date stamp On/Off
Adjust video size - 1080FHD (1920X1080) / 1080P
(1440X1080) / 720 (1280x720) / WVGA (848x480) /
VGA (640x480)
Adjust photo exposure: :+2.0, +5/3, +4/3, +1.0,
+2/3, +1/3, +0.0, -1/3, -2/3, -1.0, -4/3, -5/3, -2.0
Set time for videos to save and start new
video recording.
off/1min/2min/3min/5min/10min
e-ssential