User Manual

Installation

11. Scroll to select the second line and press <Enter>. The display will read:

CAUTION: Instrument power must be turned off

and back on for set point to take effect

12. Do

not

turn off the GC; instead press <Enter>. The display should read:

CONFIGURE BACK DETECTOR

Configured: Channel Partner

Ignore Ready = False

[B-det] = (Signal) (FID)

13. Turn off the GC and power it back up. Verify the configuration by

pressing <Back Det>. The display should read:

Back detector (CP)

Temperature xx. .x

Output xxxx