User Manual

Components of the Detector System

Components of the detector system are listed in Table 1 below. Check the

contents of the packages to verify that everything is present. Contact the

factory if anything is missing or damaged. (NOTE: damaged shipments

must remain with the original packaging for freight company inspection.)

Introduction

Description Quantity Product number

Detector assembly (includes detector, heater, and electrometer):

for Agilent 6890 1 PD-D3-I

for Agilent 7890 1 PD-D3-I-7890

Pulser module 1 PD-M2

Pulser power supply 1 I-23569-1

Agilent FID board: for Agilent 6890 1 I-G1531-60020

for Agilent 7890 1 I-G3431-60020

Helium purifier 1 HP2

Miniature helium purifier 1 HPM

Fittings kit 1 PD-KIT-D3

Includes: 1/32" polyimide ferrule 5 ZF.5V

1/32" polyimide plug ferrule (no through hole) 1 ZF.5VX

1/16" gold-plated ferrule 5 ZF1GP

0.25 - 0.44 mm polyimide column ferrule 5 FS.4

0.4 - 0.5 mm polyimide column ferrule 5 FS.5

1/16" union 2 ZU1

1/16" tee 1 ZT1

1/8" external to 1/16" internal reducer 2 EZR21

1/8" to 1/16" reducing union 2 EZRU21

1/32" external nut 1 EN.5KN

Fused silica adapter (installed) 1 IZERA1.5

Packed column adapter 1 I-23642-D3

Restrictor, 30 cc/min @ 60 psi He 1 TGA-R-30F60P

Instruction manual 1 MAN-PDD3

Table 1: Components of the D3 system