Welder User Manual

Initialisation
5-22
R
5.4 Welding parameters
The following charging voltages specified in the diagram below are standard
values which have been determined in combination with the respective stud
welder and the standard Welding Pistol PS-1. AlMg3 and StVK were used as
stud material, AlMg3 or St. as base material. The charging voltages vary from
the stated setting according to the material type, workpiece thickness and
surface condition of the workpiece.
5.4.1 Stud Welder BMS-660-90
5.4.2 Stud Welder BMS-690-135
M3
60
80
100
120
140
160
180
200
220
M4 M5 M6 M8
Stud diameter
Charging voltage (V)
SZ.0012.E
M3
60
80
100
120
140
160
180
200
220
M4 M5 M6 M8
Stud diameter
Charging voltage (V)
SZ.0011.E