Welder User Manual

Table of Contents
i
R
Table of Contents
1. General information ________________________________________________ 1-1
1.1 The following should be principally observed ..______________________________1-1
1.2 Intended use __________________________________________________________1-2
1.3 Information on the product ______________________________________________1-2
1.4 Serial number _________________________________________________________1-2
1.5 Information on the documentation ________________________________________1-3
1.5.1 Chapters of Operating Instructions________________________________________1-3
1.5.2 Information on the Operating Instructions __________________________________1-4
1.5.3 Reaction in the case of malfunctions ______________________________________1-4
1.6 Contacts and service adress _____________________________________________1-4
2. Description of the Stud Welding Pistols _____________________________ 2-5
2.1 Technology of tip ignition ________________________________________________2-5
2.2 Stud Welding Pistol PS-1________________________________________________2-6
2.3 Stud Welding Pistol PS-3K ______________________________________________2-7
2.4 Stud Welding Pistol PS-0K ______________________________________________2-8
2.5 Stud Welding Pistol PS-1K ______________________________________________2-9
2.6 Technical data ________________________________________________________2-10
3. Safety instructions ________________________________________________ 3-11
3.1 Characterisation of references in the Operating Instructions __________________3-11
3.2 Staff qualification and training ___________________________________________3-12
3.3 Dangers resulting from non-observance of safety instructions ________________3-12
3.4 Safety-conscious working ______________________________________________3-12
3.5 Safety instructions for the User/Operator__________________________________3-13
3.6 The following should be observed prior to initialisation ... ____________________3-13
3.7 Before starting welding operations ..._____________________________________3-14
3.8 Safety measures at the installation site ___________________________________3-14
3.9 Working with the Stud Welder___________________________________________3-15
3.10 Safety instructions for maintenance, inspection and assembly operations ______3-15
3.11 Independent retrofitting and spare parts production ________________________3-15
3.12 Non-permissible operating modes _______________________________________3-16