Installation guide

14
3.4 Live View Page
T
he live view pa
g
e comes in several screen
modes, for example 1920x1080,
1280x1024, 1280x720, 800x600, 704x480
(576), 640x480, 352x240 (288) and
320x240. Select the most suitable mode in
accordance with your PC specifications and
monitorin
g
purposes.
1) General controls
Live View Page Search & Playback Page Setup Page Help Page
The video drop-down list allows you to select a customized or pre-programmed
video stream on the live view page. Stream profiles are configured under Setup > Basic
Configuration > Video & Image. For more information, see section “3.5.1 Basic Configuration >
Video & Image” of this user’s manual.
The resolution drop-down list allows the selection of the most suitable video
resolutions to be displayed on Live View page.
The protocol drop-down list allows the selection of the combination of protocols
and methods to use depending on your viewing requirements and on the properties of the
network.
2) Control toolbar
The live viewer toolbar is available in the web browser page only. It displays the following
buttons:
The Stop button stops the video stream being played. Pressing the key again toggles the
start and stop. The Start button connects to the network camera or start playing a
video stream.
The Pause button temporarily stops (pauses) the video stream being played.
The Snapshot button takes a picture (snapshot) of the current image. The location where
the image is saved can be specified.
The digital zoom activates a zoom-in or zoom-out function for video image on the live
screen.
The Full Screen button causes the video image to fill the entire screen area. No other
windows will be visible. Press the 'Esc' button on the computer keyboard to cancel full
screen view.
The Manual Trigger button activates a pop-up window to manually start or stop the event.