Installation guide

15
3) Video Streams
The network camera provides several images and video stream formats. Your requirements and
the properties of your network will determine the type you use.
The Live View page of the network camera provides access to H.264, MPEG-4 and Motion JPEG
video streams and to the list of available video streams. Other applications and clients can also
access these video streams/images directly, without going via the Live View page.
3.5 Network Camera Setup
This section describes how to configure the network camera, and is intended for product
Administrators, who have unrestricted access to all the Setup tools, and Operators, who have access
to the settings for Basic, Live View, Video & Image and System Configuration.
The network camera is configured by clicking Setup in the top right-hand corner of the Live View page.
Click on to access the online help that explains the setup tools.
When accessing the network camera for the first time,
the “Admin Password” dialog appears. Enter your
admin name and password, set by the administrator.
Note: If the password is lost, the network camera must
be reset to the factory default settings. See “3.8
Resetting to the Factory Default Settings”. The default
administrator username is “ADMIN” and password is
“1234”.