Installation guide

39
▼ Record
When the network camera detects an event, it can record the video stream onto the Micro SD Memory
(not supplied) or NAS (Network Attached Device) as a storage device. Check the "Enable Record" box
to enable the service.
• Record Setting
- Overwrite: Click checkbox to overwrite the storage device.
- Stream Type: You can select Stream 1, Stream 2, or Stream 3.
* Stream1: H.264 or MPEG-4 data
* Stream2: MJPEG data
* Stream3: H.264 or MPEG-4 data
- Pre-event: Enter pre-event time value for the storage device pre-recording.
- Post-event: Enter post-event time value for the storage device pre-recording.