Installation guide

40
• Record Schedule
The weekly recording schedule can be set for each day. Drag or click a box area; clicking the block
toggles the recording between on and off. Click the “All Select” button to set a schedule for the entire
week, 24/7; to record for a whole day, click in the “0” box and drag to “23.”
Note that the time is in 24 hour format, where 0 indicates midnight.
• Device Setting
Select Device Type to be recorded in the drop-down list. The screen changes according to
selection.
- SD: Built-in SD card.
- CIFS: A file format for a NAS device.
- NFS: A file format for a NAS device.
Note 1: Common Internet File System (CIFS) is a remote file access protocol that forms the basis for
Windows file sharing, network printing, and various other network services. CIFS requires a large
number of request/response transactions and its performance degrades significantly over high-latency
WAN links such as the Internet.
Note 2: Network File System (NFS) is a network file system protocol, allowing
a user
on a client
computer to access files over a network in a manner similar to how local stor
age is accessed. NFS, like
many other protocols, builds on the Open Network Computing Remote Procedure Call (ONC RPC)
system.
The CIFS screen display
s as below.
* Address: Enter IP address for NAS device.
* Remote Directory: Enter directory or folder location to be recorded in the NAS device.
* Capacity: Enter the capacity of storage to be used. It must be less than the total storage
capacity.
* IP/Password: Enter ID and Password. The network camera will ask for these whenever
you access NAS device.
* Check: Press the Check button to check the validity of Device Setting data.
• Format
Click the Format button to format SD card.
• Device Information
Show current SD card information.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.