Installation guide

6
1. Description
The information in this manual provides quick installation and setup procedures for the CE202D-N
Series of Camera Domes. These units should only be installed by a qualified technician using approved
materials in conformance with federal, state, and local codes. Read these instructions thoroughly
before beginning an installation. Always refer to Vicon’s website to assure you have the most up-to-
date manual, www.vicon-security.com
.
The CE202D-N HD IP Camera Dome is designed for indoor security installations. This cost-effective
fixed network camera includes an integral 3.7 mm megapixel fixed lens; the 1080p resolution delivers
crisp clear images. The CE202D-N cameras are fully compatible with all ViconNet® systems; its ONVIF
certification provides an open-platform for integration into other video management systems.
The network camera provides triple-streaming video and supports H.264 compression technology.
MPEG-4 and Motion JPEG (M-JPEG) compressions are also provided, as are privacy masking and
motion detection. Installation is made easy and cost-effective with Power-over-Ethernet (PoE); the
camera also accepts 12 VDC.
1.1 Components
The system comes with the following components:
Camera Unit Installation CD Installation Guide Accessory Kit Template sheet
Alarm Cable Optional OSD Controller
Check your package to make sure that you received the complete system, including all components
shown above.
Note: Adapter for 12 VDC is not supplied and the optional V920D-OSD OSD Controller can be
purchased separately.