Product specifications

106 • Configuring the ViconNet System XX112-36-00 Rev 909 Kollector Hybrid Network Digital Video Recorder
8. Navigate to and select the device you want to add to the group in the Devices list in the bottom-left
corner of the window. Once the Group is highlighted and the name appears at the top of the window
above the Group Set navigation list, drag the device to the list of devices on the right.
9. (Optional) For each device selected, enter a unique secondary ID (2
nd
ID). This ID can be any number
up to 3 digits. This number must be entered if you are going to use a VMC keypad.
NOTE: If you try to give two devices the same secondary ID, the conflicting lines are colored pink, as
shown below. In addition, if the devices, which have the conflict, are placed in two groups, the
group’s icon in the Group Set list are also colored pink.
10. (Optional) You can reorder the list view in the Group by clicking on the up and down arrows to
the right of the list.
11. Clicking the
will update (refresh) the screen to reflect all changes.
12. Click Save or Save and Exit.
After a Group Set has been created as the Working Set, you can select to display either the device name or
secondary ID or both Main window Groups list.
Exiting the Groups Editor Window
There are two ways to exit the Groups Editor window:
• To save your changes, click Save and Exit.
• To close the window without saving your changes, click Close. In this case, a confirmation message
appears to verify that you do not want to save your changes.
In both cases, the Groups Editor window is closed.
Editing a Group Set
After a Group Set has been created, it can be edited as follows:
• The definition of the Group Set: The Group Set can be renamed, deleted or defined as the Working
Set.
• The content of the Group Set: Groups and devices can be added to or deleted from the Group Set.