User`s manual

Chapter 10: LUN Mapping
Figure 10-2: Selecting the Host Channel ID Number
Step 3. After selecting the ID, the LUN Map Setting window appears as
shown in Figure 10-3.
Figure 10-3: LUN Map Setting Window
10.2. LUN Mapping
10.2.1. Mapping a Complete LD or LV
Step 1. If you want to map a complete LD or LV, make sure that the LD
or LV has not been partitioned.
Step 2. Follow the steps listed in Section 10.1 above to access the Host
LUN Mapping window shown in Figure 10-3.
Step 3. Select the appropriate Channel, SCSI ID, and LUN numbers
from the separate pull-down lists above.
Step 4. Select a Logical Drive or Logical Volume and then select the
Partition color bar with a single mouse-click. The partition bar
10-3