User`s manual

Chapter 13: NPC Utility Coupled with Mode Three Installation
Figure 13-2: The NPC Initial Screen
13.2. Configuring the Utility Options
13.2.1 SSL
SSL stands for “Secure Sockets Layer Handshake Protocol.” As shown in
Figure 13-2 above, the initial screen defaults to the SSL option. Select the
check box if you want to enable SSL connection for the management
session with the array.
NOTE:
The configuration will take effect after you restart the network
connection or reset the management station.
13.2.2 Email Notification
Follow the steps below to configure email notification:
Step 1. Click on the
Notification Process Center Setting tab. Open the
Base Setting
page.
Configuring the Utility Options 13-3