User`s manual

RAIDWatch User’s Manual
Figure 13-6: SNMP Traps – Receiver Side Settings
Host IP: The port number of the agents listening for traps.
Severity: Select the severity level of events to be sent to the
receiver station.
Trap receivers will be added to the Trap Receivers list on the
right.
Step 5. Click
Apply or OK to complete the configuration.
13.2.4 Broadcast Notification
Step 1. Click on the Notification Process Center Setting tab and
Broadcast to display Broadcast settings.
Figure 13-7: Broadcast – Sender-side Settings
Step 2. Fill in or select the following configuration fields:
Enabled: Select this check box to enable the notification.
13-6 Configuring the Utility Options