Specifications

Technical errors and omissions excepted. The pictures may not always represent the actual item delivered.

I.3

CCD Cameras

I.3CCD Kameras

VCM

application software "vin camera manager" for remote set-up of

the following cameras: IX-4000A, FVK-65/PVF/WDR-II, Please

note: RS-232/422/485 converter is required.

577999

IXion-D

stylish IXion CCD camera dummy (IX-1000A - IX-4000A), ready

for installation, incl. blind lens, not suitable for assembly of PCB

cameras!

577001

VKK-D

elegant VKK camera dummy, ready for installation, not suitable for

assembly of PCB cameras!

553006

I.4Power Supply Units and Accessories

videotronic infosystems' wide range of power supply units offers suitable versions for all videotronic products. With the 5.6" TFT LCD

service monitor camera setting and signal diagnostics are no problem.

ST-NT-12/3

12 V/DC / 400 mA power adapter (EURO type), stabilised, 1.5 m

connection cord with 3 open ends for 12 V/DC and the linelock

phase, suitable for all 12 V/DC products with terminal block (VSZ-

BNC, VEZ-BNC, IX-1000A, IX-3000A, IX-4000A), 230 V/AC

575400

ST-NT-12N

12 V/DC / 400 mA power adapter (EURO type), stabilised, 1.5 m

connection cord with low voltage connector, suitable for all

products with low voltage socket (videotronic mini dome cameras)

575408

ST-NT-24/2

24 V/AC / 500 mA power supply unit, ca. 1.5 m connection cord

with open ends, suitable for all IXion CCD cameras and FVK dome

cameras

575424

ST-NT-12/800

12 V/DC / 800 mA power supply unit for operating a 12 V/DC

camera with VSZ-BNC, connection cord with open ends, 230 V/AC

operating voltage

575428