Product specifications

The Configure Autotour allows configuration of the autotour feature. There are two autotours, numbers 88 and
89. The autotour feature allows the user to program a specific sequence of camera zoom and drive motion. All
other camera functions remain at their default settings or the setting last programmed. The autotour functions are
limited to pan, tilt, and zoom. The program Autotour menu can also be entered directly by calling the autotour
from the keyboard while the keyboard is in Program Mode. When programming an autotour, and pan, tilt or zoom
reaches 256 steps, a message “Buffer Full” will appear.
Note: Be careful to not create a programming loop by calling a tour and having the called tour call the original tour
or any other previously called tour. This will cause a loop that will stop the tour.
The Advanced Programming option allows setting of the Run Mode to Repeat
continuously or Once. It also allows editing of the currently selected sequence by
appending it or overwriting it.
The Clear Autotour allows complete removal of the currently selected autotour
number.
20 XX134-40-00 Rev 104 SurveyorVFT Camera Dome Programming