Product specifications

4. Press the Select button on the lower section of the screen.
Note: You MUST click the Select button to add the unit to the list; verify that it is added to the list.
5. The selected unit appears on the Selected unit section on the top of the screen and settings can be
changed.
Unit TAB
The Unit TAB allows the user to change the following settings: Unit name, Nucleus IP address, IP address,
Net mask, Gateway, DNS, DHCP, Time Zone, daylight saving time, Local time, Local date, and Debug level,
on a scale of 0-4, where 4 is most information.
Note: The Apply button must be pressed for changes to take effect.
Note: Verify all IP addressing parameters with your IT administrator.
Note: In order for the DHCP option to work properly, verify that the server does not expire the IP address
licensed to the camera. (Camera should always receive the same IP address from the DHCP server.)
2
4
3
3.2
Unit
1
Select
XX134-08-01 Rev 209 SurveyorVFT Camera Dome System 6BConfiguration • 45