Product specifications
68 • 13BTechnical Information XX134-08-01 Rev 209 SurveyorVFT Camera Dome System
Technical Information
with electronic control.
Units available in color and day/night
(NTSC/PAL) formats and a variety o
Electrical motorized pan and tilt
f
zoom and feature capabilities.
18-30 VAC. (Will operate within spec
on voltages up to 32 VAC. Fo
r
voltages between 30-32 VAC, a
Class 3 indoor/dry or outdoor/wet
power supply with appropriate wiring
methods in accordance with the
National Electrical Code ANSI/NFPA
See Table 4.
ViconNet (TCP/IP): 1.4 A.
Outdoor:
Coax, Fiber, UTP: 1.8 A.
ViconNet (TCP/IP): 2.3 A.
Indoor:
Coax, Fiber, UTP: 24 W.
ViconNet (TCP/IP): 34 W.
Outdoor:
Coax, Fiber, UTP: 50 W.
ViconNet (TCP/IP): 54 W.
Indoor:
Coax, Fiber, UTP: 1.3 btu/min
(0.34 kg-cal/min).
ViconNet (TCP/IP): 1.9 btu/min
Coax, Fiber, UTP: 2.8 btu/min
(0.6 kg-cal/min).
ViconNet (TCP/IP
(0.77 kg-cal/min).
Note: These figures represent the
conversion of 100% of the electrical
energy to heat. Actual percentage o
70, State and Local wiring codes
must be used.)
Indoor:
Coax, Fiber, UTP: 1.0 A.
(0.49 kg-cal/min).
Outdoor:
): 3.1 btu/min
f
heat generated will be less and will
vary from product to product. These
figures are provided as an aid in
determining the extent of cooling
required for an installation.
Video Out: See version type.
Power: 2-position removable screw
terminal block.
Control Input/Output: See version
type.
Relay Output: See version type.
Alarm Input: 8-position removable
screw terminal block.
75 ohms.
F1: 5x20 mm, 1.6 A 250 VAC slo-blo.
F2: 5x20 mm, 2.5 A 250 VAC slo-blo.
FCC Class A.
360°.
-2.5° (-2.5° above horizon) to
92.5° (-2.5° past vertical).
Variable, 0.1 to 360°/sec
(120°/sec in 22X).
Variable, 0.1 to 42°/sec;
enable/disable.
Variable, 0.1 to 150°/sec
(90°/sec in 22X).
ra Types:
Drive Type:
Came
Input Voltage:
Maximum Powe
r
Cable Distance:
Power Consumption:
Heat Equivalent:
Standard Connecto
Current Ratings
(@24 VAC), max:
r
Types:
Video Output
Impedance:
Fuse:
Radio
Emission Rating:
V
ideo Pan View:
V
ideo Tilt View:
Pan Speed:
Autopan Speed:
Tilt Speed:
16 max, programmable for size and
titling; capability to be blanked out
(22XEX/23X/35X only).
1 sec nominal.
0.1 degrees maximum in pan
and tilt.
32 programmable events per
tour. Events may be preset
autotours, tour repeat or another
tour, save/recall camera status.
22XEX/23X/35X: 2 autotours
available with 256 pan, tilt and zoom
functions per autotour.
Programming is done in real time
with joystick and push buttons.
Less than 1.8 sec from end to end.
79 individual programmable preset
positions.
22X: 4 tours available.
22XEX/23X/35X: 8 tours available.
positions with speed control,
alarm acknowledge, dwelltime
control, relay control, call
A
utotours not available on 22X
model.
4 alarm inputs, individually
programmable.
Functional state enable/disable.
Report state (report on/off).
A
ctive state (high/low).
Mode (manual, momentary or
automatic) with programmable dwell
time control.
Set and reset action (preset solve,
relay on/off, tour, autotour).
A
larm titling.
1 relay output.
Power-on state definition (on/off).
Output type definition (momentary o
r
latching).
Relay function status titling.
Resistive Load: 1.5A@30 VDC
(max).
Inductive Load: 0.75 A @30 VDC.
On-screen, menu-driven system
allowing full configuration of the
dome.
22XEX/23X/35X: 16 individual,
programmable, zoom-scalable.
Programmable for camera, preset,
sector, relay and alarms.
Camera: 1 for each.
Preset: 79 maximum.
Sector: 16 maximum (not on 22X).
A
larm: 4 maximum.
Individual type date and time
enable/disable; 20 characters
maximum.
Selectable position.
Three text sizes for top two lines.
Fade capability.
Compass/azimuth, 8 compass
headings (N, NE, E, SE, S, SW, W,
NW). Not available on 22X.
Sectoring:
Speed:
Preset Accuracy:
Autotour Capabilities:
Zoom and Focus Speed:
Preset Capabilities:
Preset Solving
Tour Capabilities:
A
larm Capabilities:
Relay Output
Capabilities:
Control Display:
Privacy Masks:
Screen Titling
Capabilities:
OPERATIONAL
ELECTRICAL