Installation and Operation Guide XX234-00-02 V660B-488IR High-Resolution Bullet Camera Vicon Industries Inc., 89 Arkay Drive, Hauppauge, New York 11788 Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116 24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300 Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC COMPLIANCE STATEMENT FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4 . Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
INTRODUCTION The camera provides high-quality images using Sony CCD technology especially designed for closed-circuit television (CCTV) and security surveillance applications. Features: High resolution and high performance 1/3" Sony Super HAD TM Technology Excellent picture quality 600 lines(Color) of resolution 22x Optical Zoom( f=4.1~88mm) Lens F1.6~3.7 Zoom and Focus Control via Remote or Keyboard Controller 0.1 lux(Color), 0 lux(B/W) with LEDs on @ F1.
CAMERA CONNECTIONS 2 4 5 6 7 8 AC/DC+ AC/DC- GND 1 ALARM -OUT 3 D/N EXT -IN ALARM-IN 1. Lens : 22x Optical Zoom( f=4.1~88mm) Lens for wide area monitoring 2 . Video : BNC connector used to connect the camera to a monitor, switcher, etc. 3. Power : 24V AC input / 12V DC input power source from a DC 12V or AC 24V ac +/-10% 60/50Hz +/-1Hz. Use Certified/Listed Class 2 power supply transformer only. *If using DC 12V power adaptor, use a power supply capable of supplying 10 Watts. 4.
PACKAGE CONTENTS SUNSHIELD CAMERA SUNSHIELD-BOLT Screw SCREWS REMOTE CONTROLLER Firmly attach the bracket to the wall or ceiling DIMENSIONS (3.4) (6.5) (10.9) UNIT : mm (inches) WATER INGRESS PREVENTION After using the Remote Control cable, disconnect it and insert the Remote Control Port Cap. Secure it tightly. Caution : This is a sealed camera with no internal adjustments and as such opening the case may invalidate the warranty.
CAMERA FIXING Use the 3 location holes around the base of the bracket to secure the camera to a wall or ceiling using fixing suitable to the type of surface CAMERA ADJUSTMENT The camera is supplied with a remote control set up tool.
Connect the remote control using the 6 pin din connector end to the socket within the camera: Connect the BNC to a set up monitor to view the picture and On Screen Menus. To Enter the menus press the button on the remote control. To Navigate the menus, move the button left/Right/Up and Down, press the button to Enter.
THE DEFINITION OF TERMS White Balance Compensates for deviations in the white color caused by changes in the color temperature of the light source so that the colors are reproduced correctly. Exposure Adjusts the images to the optimum brightness. SHUTTER (Electronic Shutter) Controls the integration time (exposure) of the photodiode array and reduces blooming, overexposure, and smear when capturing moving objects.
Resolution Controls the display of fine details. The higher the resolution, the higher level of details can be seen. 2D-NR (Digital Noise Reduction) Adjusts the illuminance noise level in low light situations by reducing image noise in order to improve the image. Nega Reverses the color signals for the Chroma signal so the image looks like a “negative.
STRUCTURE OF THE SETUP MENU EXPOSURE WHITE BAL BACKLIGHT DAY NIGHT DPC SPECIAL RESET SAVE&END END SHUTTER BRIGHTNESS AGC DWDR IRIS ADJ END ATW1 ATW2 AWC -> SET MANUAL OFF BLC HLC COLOR AUTO B/W EXT COVER THE LENS ENTER KEY FOR START OTHERS FOR END CAM TITLE MOTION PRIVACY IMAGE ADJ COMM ADJ PRESET ZOOM DISP VERSION END FACTORY LENS ADJ END 8
EXPOSURE The EXPOSURE menu is used to set the automatic light control method for the camera. It provides the ability to adjust the shutter speed, brightness, AGC, dynamic range and iris functions of the camera. 1) SHUTTER 2) BRIGHTNESS 3) AGC 4) DWDR 5) IRIS ADJ Select the shutter mode.(Auto,1/60(50), FLK~ 1/100,000 sec) Can be changed while in shutter mode. Adjust BRIGHTNESS level (0 ~ 255) Can be adjusted while in DC/ manual lens mode.
BACKLIGHT The BLC (Backlight Compensation) function provides compensation by increasing the brightness of the overall screen to compensate for the overly bright areas of the background so that the darker areas are reproduced with more clarity. This provides a balanced scene where all objects are properly exposed.
DAY NIGHT The DAY/NIGHT menu is used to configure the day and night related setting for the camera. The camera can turn the IR(infrared)filter on or off. Mode : COLOR / AUTO / B/W / EXT EXPOSURE WHITE BAL BACKLIGHT ► DAY NIGHT DPC SPECIAL RESET SAVE&END END 1)SENSE SEL SENSOR AGC ATW2 AUTO DAY NIGHT AUTO ► SENSE SEL. SENSOR D -N LEVEL 237 D-N DELAY 5 SEC N-D LEVEL 193 N-D DELAY 5 SEC END Select the day and night sensing mode.
SPECIAL The SPECIAL menu provides the ability to set up the camera title, motion detection, privacy mask, image adjust, communication adjust, zoom preset and zoom position display functions of the camera. 1) CAM TITLE Maximum of 15 characters are allowed. A. Character Table B. Command Line C. CAM TITLE A . B ←→ CLR POS END C CAM TITLE ← : Move to left → : Move to right CLR : Erase all characters POS : Move the position of title display END : End 2) MOTION MD stands for motion detection.
3) PRIVACY It used to hide one or more areas which the user does not want to be displayed on screen. Privacy Masks can be set with their own display area and color. Maximum of 8 areas are allowed. AREA SELECT AREA STATE HEIGHT WIDTH LEFT/RIGHT TOP/BOTTOM Select MASK area number.(Area 1 ~ Area 8) Select MASK ON/OFF Adjust height of MASK area Adjust width of MASK area Adjust the location of the MASK area with boundary LEFT and RIGHT Adjust the location of the MASK area with boundary TOP and BOTTOM.
4) IMAGE ADJUST The IMAGE ADJUST menu provides the ability to adjust the lens shading, 2DNR, mirror image, font color, contrast, sharpness, display device and negative image functions of the camera. LENS SHAD 2DNR MIRROR FONT COLOR CONTRAST SHARPNESS DISPLAY NEG. IMAGE Adjust Lens shading level (0~255) Depending on the level value, dims down the center area and brightens up the side area.
SPECIAL CAM TITLE MOTION PRIVACY ► IMAGE ADJ COMM ADJ PRESET ZOOM DISP VERSION END IMAGE ADJUST OFF OFF OFF ON 01.00 ► LENS SHAD 2DNR MIRROR FONT COLOR CONTRAST SHARPNESS DISPLAY NEG.IMAGE END ON ON OFF CRT ADJUST ► PED LEVEL COLOR GAIN END 28 192 LCD AJUST ► GAMMA PED LEVEL COLOR GAIN END 0.65 28 176 USER AJUST ► GAMMA PED LEVEL COLOR GAIN END 0.50 28 176 122 21 CRT OFF 5) COMM (RS485) ADJUST The camera can be controlled remotely by a control keypad using a RS485 connection.
6) PRESET ZOOM SEL SET PRESET SAVE Select the number for setup.(PERSET 1 ~ PRESET 5) Setup the selected preset position. Exits without saving changes. PRESET SPECIAL CAM TITLE MOTION PRIVACY IMAGE ADJ COMM ADJ ► PRESET ZOOM DISP VERSION END OFF OFF OFF SET PRESET1 ZOOM SEL ► SET PRESET SAVE END PRESET1 ON 01X 01.00 ZOOM DISPLAY VERSION Select the zoom position display (01X ~22X) ON /OFF. Firmware version.
SPECIFICATIONS MODEL Power General NTSC PAL Power source AC24V ± 10% / DC12V ± 10% Power consumption 10.0W(700mA) 1/4" Sony Super HAD Image sensor Total pixels 795(H) x 596(V) 811(H) x 508(V) Scanning system 2:1 interlace Scanning frequency 15.734KHz(H) x 59.94Hz(V) 15.625KHz(H) x 50Hz(V) Sync. system Internal Electronic Shutter 1/60 ~ 1/100,000 sec 1/50 ~ 1/100,000 sec Resolution 600TV lines (Color) 0.1 Lux(Color), 0 Lux (IR LED ON) Min. illumination 1.
Vicon Standard Equipment Warranty Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmanship under Normal Use from the date of original retail purchase for a period of three years, with the following exceptions: 1. VCRs, all models: Labor and video heads warranted for 120 days from date of original retail purchase. All other parts warranted for one year from date of original retail purchase. 2.
Vicon Industries Inc.