System information

MX Control Card Configuration
A-4 Vicon MX Hardware System Reference
RS 422
To connect the MX Control to selected third-party video tape
recorders (VTRs), you must either create your own plug or use an
adaptor to plug into the RS 422 serial socket on the rear panel of the
MX Control. Table A-2 lists the RS 422 serial port pin allocations.
RS 232
To connect the MX Control to devices that support RS-232 serial
communications, you must either create your own plug or use an
adaptor to plug into the RS 232 serial socket on the rear panel of the
MX Control. Table A-2 lists the RS 232 serial port pin allocations..
Table A-1: RS 422 serial port pin allocation
Pin Function
1GND
2 TX -
3RX +
4 GND
5Not Connected
6 GND
7TX +
8 RX -
9GND
Table A-2: RS 232 serial port pin allocation
Pin Function
1Not Connected
2 TX
3RX
4 Not Connected
5GND
6 Not Connected
7CTS
8 RTS
9Not Connected
MXhardware_Reference.book Page 4 Thursday, September 7, 2006 11:36 AM