System information

GPIO and Remote Connections in MX Ultranet and MX Sync
Vicon MX Hardware System Reference B-7
Remote Output Status Events
Table B-6 shows the status events output by the Remote control after
the remote capture has been triggered (where High=5V and
Low=0V). You can configure other devices in your system to read
these events and respond accordingly.
Table B-6: Remote output status
Output Status Vicon System Event
Pin 7 Pin 14
Low Low Idle (no capture in progress)
High Low Armed (prepared for capture)
Low High Paused
High High Capturing
MXhardware_Reference.book Page 7 Thursday, September 7, 2006 11:36 AM