System information

MX Camera Lens Focusing
Vicon MX Hardware System Reference C-9
• Near Infrared or Infrared: the R label, if the lens has an
infrared focus compensation setting; otherwise, the white
mark as above.
Figure C-5: Camera focus ring
7. In the Vicon software, observe the sharpness of the image of the
two 25 mm markers.
If you are using a fixed-focus lens:
• Slowly loosen the back focus locking ring using the lever rods
protruding on either side, as shown in Figure C-6, and rotate
MXhardware_Reference.book Page 9 Thursday, September 7, 2006 11:36 AM