System information

Technical Specifications
D-2 Vicon MX Hardware System Reference
MX Camera Specifications
The following sections provide technical specifications for the
different types of Vicon MX cameras (MX40+, MX40, MX20+, MX13+,
MX13, MX3+,and MX3) and their associated strobe units (Visible,
Infrared, and Near Infrared), lenses, and cables. For further details
on the use of these MX cameras in a Vicon MX system, see
Chapter 3 MX Cameras.
If you are integrating Vicon MCam2, VCam, SVCam, MCam(PAL), or
MCam(NTSC) cameras supported previously by Vicon V-series
systems, see Chapter 2 MX Bridge for details on those cameras. For
further details on these cameras, see the hardware user manual for
your V-series system or Vicon Online Support (VOS). For details on
obtaining information from VOS, see Appendix G Support Resources.
MX40+ and MX40 Camera Specifications
Table D-2: MX40+ and MX40 camera specifications
Component Specification
Imager CMOS
Aspect Ratio 4:3
Pixel Size 7 microns x 7 microns
Photosensitive Pixels 2352 H x 1728 V
Sensor Size 16.46 mm (H) x 12.10 mm (V),
20.43 mm (Diagonal)
Sensor Dynamic Range 59 dB
Digital Responsivity Monochrome 2500 bits per lux-
second @ 550nm ADC ref @ 1V
Lens Mounts C- and SLR-mount options
Size (with 20 mm SLR lens) 215 mm (H) x 138 mm (W) x
255 mm (D)
Weight (with 20 mm SLR
lens)
2.6 kg
RoHS compliant Yes (MX40+ camera)
MXhardware_Reference.book Page 2 Thursday, September 7, 2006 11:36 AM