System information

Vicon MX Hardware System Reference
© 2004-2006 Vicon Motion Systems Limited. All rights reserved.
For use with Vicon MX Hardware in Vicon MX systems.
Vicon Motion Systems Limited reserves the right to make changes to information in this document without notice.
Companies, names, and data used in examples are fictitious unless otherwise noted. No part of this publication
may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic or
mechanical, by photocopying or recording, or otherwise without the prior written permission of Vicon Motion
Systems Limited.
Information furnished by Vicon Motion Systems Limited is believed to be accurate and reliable; however, no
responsibility is assumed by Vicon Motion Systems Limited for its use; nor for any infringements of patents or other
rights of third parties which may result from its use. No license is granted by implication or otherwise under any
patent rights of Vicon Motion Systems Limited.
Vicon®, BodyBuilder®, BODYLANGUAGE®, DYNACAL®, and OLGA® are registered trademarks of OMG Plc.
Vicon MX™, Polygon™, Vicon iQ™, Vicon Nexus, and Workstation™ are trademarks of OMG Plc.
The contents herein includes software initially developed by Lucent Technologies Inc., and is subject to the terms
of the Lucent Technologies Inc. MicroMonitor Software Public License Agreement. A copy of the MicroMonitor
Software Public License Agreement is available at: www.bell-labs.com/topic/swdist/licenses or by contacting
Lucent Technologies at [e-mail].
All software distributed under such Agreement is distributed on an “AS IS” basis, WITHOUT WARRANTY OF ANY
KIND, either express or implied. See the MicroMonitor Software Public License Agreement for the specific language
governing all rights, obligations and limitations under such Agreement.
Portions of the software developed by Lucent Technologies Inc. are Copyright © 1999-2000. All rights reserved.
Contributor: Vicon Motion Systems Ltd.
Part of the software embedded in this product is eCos - Embedded Configurable Operating System, a trademark
of Red Hat. Portions created by Red Hat are Copyright (C) 1998, 1999, 2000 Red Hat, Inc. (http://
www.redhat.com). All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY RED HAT AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Other product and company names herein may be the trademarks of their respective owners.
Oxford
14 Minns Business Park, West Way
Oxford OX2 0JB
UK
Tel: [phone]
Fax: [phone]
Los Angeles
5419 McConnell Avenue
Los Angeles, CA 90066
USA
Tel: [phone]
Fax: [phone]
Denver
7388 S. Revere Parkway, Suite 901
Centennial, CO 80112
USA
Tel: [phone]
Fax: [phone]
Lake Forest
9 Spectrum Pointe Drive
Lake Forest. CA 92630
USA
Tel: [phone]
Fax: [phone]
Vicon Motion Systems is an OMG Plc company
Email: [e-mail]
Web: http://www.vicon.com
MXhardware_Reference.book Page ii Thursday, September 7, 2006 11:36 AM