System information

Introduction
Vicon MX Hardware System Reference 1-5
Integrated Third-party Application Architecture
If your application integrates third-party analog capture, genlock, and
timecode devices, you must include an MX Control, with the
appropriate option card installed, in the Vicon MX architecture. If you
require an extended interface to the GPIO (general purpose input
output) or remote control functionality available in the MX Control or
MX Ultranet, you can include an MX Sync between that MX unit and
the third-party device. For descriptions of these system elements, see
Vicon MX Architecture Elements on page 1-1. This integrated third-
party application architecture is illustrated in Figure 1-3.
Figure 1-3: Vicon MX architecture with MX Control and third-party device
MXhardware_Reference.book Page 5 Thursday, September 7, 2006 11:36 AM