System information

MX Bridge
Vicon MX Hardware System Reference 2-3
•Blue
LED indicating the camera’s selection state in the Vicon
software:
MX Bridge Rear Panel
Figure 6-2 illustrates the rear panel of the MX Bridge.
Figure 2-2: MX Bridge rear panel
The rear panel contains the following controls and connection points
(from left to right of the rear panel):
• Camera Select
Rotary dial to configure the MX Bridge for a particular Vicon
camera type:
• 13: MCam2
• 14: VCam/SVCam
•5: MCam(PAL)
• 6: MCam(NTSC)
For details on these V-series cameras, see Supported Camera
Modes on page 2-4.
Flashing: Connected but not currently sending data.
Off: Not connected.
On: Selected.
Flashing: Selected as primary.
Off: Not selected.
MXhardware_Reference.book Page 3 Thursday, September 7, 2006 11:36 AM