System information

MX Cameras
3-16 Vicon MX Hardware System Reference
Standard Functionality
After the camera is connected, the strobe unit status lights provide
the following information (from left to right):
• Yellow
LED indicating the camera’s enabled state in the Vicon application
software:
•Green
LED indicating the camera’s connection state in the Vicon
application software:
•Blue
LED indicating the camera’s selection state in the Vicon
application software:
For details on the status of the camera’s state within the software, see
the documentation for your Vicon application software.
Vicon Application Software Functionality
In addition to the standard functionality described in the previous
section, in some Vicon application software, such as Nexus and
Vicon iQ, these strobe unit status lights provide process feedback. For
further information, see the documentation for your Vicon application
software.
On: Disabled by the software (e.g. the RealTime Engine
has been started, but this camera is not included in
the current calibration).
Off: Not disabled by the software.
On: Connected and sending data.
Flashing: Connected but not currently sending data.
Off: Not connected.
On: Selected.
Flashing: Selected as primary.
Off: Not selected.
MXhardware_Reference.book Page 16 Thursday, September 7, 2006 11:36 AM