System information

MX Net
7-2 Vicon MX Hardware System Reference
host PC or MX Links (from left to right and top to bottom of display
window):
•Net Connect
LED is lit when the port for the corresponding MX camera or
alternative device attached to the MX Net is connected to the
MX Ethernet network.
•Rx/Tx
LED flashes when the port for the corresponding MX camera or
alternative device attached to the MX Net is receiving (Rx) or
transmitting (Tx) data or communications over the MX Ethernet
network. The frequency of the flashes varies with the amount of
network traffic.
•Power On
LED is lit when the MX Net is on and receiving power, or off if the
unit is turned off or if the power cord is not properly connected.
•1000
LED is lit when the MX Net has a good connection to the host PC
or an MX Link over a Gigabit MX Ethernet network.
•100
LED is lit when the MX Net has a good connection to the host PC
or an MX Link over a 100 Mbps MX Ethernet network. This rate is
generally too slow for MX Ethernet network traffic.
•Link I/O
LED flashes when the port for the host PC or an MX Link attached
to the MX Net is receiving (Rx) or transmitting (Tx) data or
communications over the MX Ethernet network. The frequency of
the flashes varies with the amount of network traffic.
MXhardware_Reference.book Page 2 Thursday, September 7, 2006 11:36 AM