System information

MX Sync
Vicon MX Hardware System Reference 8-3
•Ext Clock
BNC socket for connecting an external device to the external clock
functionality available through the Remote socket on the rear of
the MX Control or the 15-pin D-type GPIO & Remote connector
on the rear of the MX Ultranet.
•Gated Ref
BNC socket for connecting an external device to the Gated Ref
functionality available through the Remote connector on the rear
of the MX Control or the 15-pin D-type GPIO & Remote
connector on the rear of the MX Ultranet.
For details on the GPIO and Remote sockets on the rear of the
MX Control unit, see the section on MX Control Standard Connectors
in Chapter 4 MX Control. For the GPIO & Remote connector on the
rear of the MX Ultranet, see the section on the rear panel in
Chapter 9 MX Ultranet.
MXhardware_Reference.book Page 3 Thursday, September 7, 2006 11:36 AM