System information

MX Ultranet
9-2 Vicon MX Hardware System Reference
MX Ultranet Front Panel
Figure 9-1illustrates the front panel of the MX Ultranet.
Figure 9-1: MX Ultranet front panel
The front panel contains the following LED status indicators for power
and the Ethernet connections to cameras, the host PC or other
MX Ultranet units (from left to right and top to bottom of LED panel):
•Power
Green LED indicating whether or not the MX Ultranet is on and
receiving power:
• Cameras
Eight numbered LED status indicators:
• Lit when the port for the corresponding MX camera or
alternative device attached to the MX Ultranet has a good
connection to the MX Ultranet over a 100 Mbps MX Ethernet
network.
•Links
Four LED status indicators:
• Lit when the port for the corresponding connected MX Ultranet
has a good connection over a Gigabit MX Ethernet network.
On: The unit is on and receiving power.
Off: The unit is in standby, power to the unit is turned off,
or the power cord is not properly connected.
MXhardware_Reference.book Page 2 Thursday, September 7, 2006 11:36 AM