System information

MX Ultranet
Vicon MX Hardware System Reference 9-3
•Active
LED status indicator:
• Lit when the MX Ultranet communicates internally over a 100
Mbps MX Ethernet network.
•PC
A pair of LED status indicators:
• Upper LED is lit when the MX Ultranet has a good connection
to the host PC over a Gigabit MX Ethernet network. This rate
is expected for a Host PC correctly configured with a Gigabit
network card as recommended in Vicon MX.
• Lower LED is lit when the MX Ultranet has a good connection
to the host PC over a 100 Mbps MX Ethernet network. It is not
advised to connect Vicon MX to the Host PC over such a
network, Gigabit communication is recommended.
MX Ultranet Rear Panel
Figure 9-2 illustrates the rear panel of the MX Ultranet.
Figure 9-2: MX Ultranet rear panel
MXhardware_Reference.book Page 3 Thursday, September 7, 2006 11:36 AM