System information

MX Calibration Kit
Vicon MX Hardware System Reference 12-3
Table 12-1: Calibration kit contents
Key Calibration Apparatus Description
1 240 mm Wand Spacer Bar For a 3-marker wand with
14 mm markers.
2 Wand Handle For use with 240 mm (1) or
390 mm (5) wand spacer bar.
3 120 mm Wand Spacer Bar A 3-marker wand with 9 mm
markers and handle.
4 Handle Extension For use with Wand Handle (2).
5 (6) 390 mm Wand Spacer Bar A 3-marker wand with 25 mm
markers. Marker (6) can be
removed to attach this bar to
Wand Spacer Bar Extension (7).
7 Wand Spacer Bar Extension For extending 390 mm Wand
Spacer Bar (5) to create
780 mm Wand Spacer Bar.
8 Ergo calibration frame Static calibration object with
four 9.5 mm markers. These
can be exchanged for the
14 mm or 25 mm markers in
the Calibration Marker Pack
(11). All four markers must be
the same size.
9 Alignment plates For attachment to Ergocal
L-Frame (8) when placed on
force plates. The edge of the
alignment plates will accurately
align with the edge of the force
plate, ensuring a consistent
location.
MXhardware_Reference.book Page 3 Thursday, September 7, 2006 11:36 AM