Installation guide

5. Installation
The following descriptions show examples of some of the features available with V960B.
5.1 Installation Mode
Installation Mode allows use of the analog BNC output from the camera to connect the camera to a
service monitor, in order to adjust the positioning of the camera and focus the lens.
ON : Analog Output is enabled; both IP video streams are set to VGA (640 x 480) resolution.
OFF : Analog Output is disabled.
NOTE: You must turn Installation Mode OFF to utilize the megapixel features of the camera.
Additionally, all installation setup must be done prior to the camera being used with a
VMS, including ViconNet; the VMS forces the Installation Mode to OFF.