Installation guide

Slow Shutter Mode
For low light conditions, turn ON slow shutter mode.
Max AGC Gain
For low light conditions, select HIGH value; otherwise select LOW.
DC -Iris Control
Turn OFF the DC-Iris lens setting when focusing the lens.
NOTE: Follow the instructions in Chapter 3.3, and turn ON the DC -Iris function when finished.
BLC Control (Back Light Compensation)
The BLC adjusts the exposure of scenes with strong backlight in the center-bottom of the image.
When the image background is too bright, or the subject too dark, backlight compensation makes
the subject appear clearer. The settings for low light behavior determine how the camera behaves at
low light levels. These settings affect video image quality and how much noise is in the images.
Select ON or OFF.
6.2.2 Day & Night Control
Day & Night Mode
AUTO / DAY / NIGHT
Set this filter to NIGHT to allow the camera to 'see' infrared light, removing the IR cut filter, when
using an IR illuminator. This will make the image clearer. If set to AUTO, the camera will
automatically switch between IR cut filter DAY and NIGHT, according to the current lighting
conditions.
6.2.3 White Balance Control
WB Mode
AUTO/AUTO (wide mode): Automatic White Balance
MANUAL: Manual White Balance; when selected, choose Indoor, Outdoor or Fluorescent
The White Balance adjustment setting is used to make the colors in the image appear consistent,
compensating for the different colors present in different light sources.
The V960B camera can be set to automatically identify the light source and compensate for its color
temperature. If necessary, the type of light source could be set manually.
6.2.4 Image Property Control
Modify the video signal parameters, such as: Brightness, Sharpness, Contrast, Color, and Hue.
Brightness (0 ~ 30; Default: 15)
Sharpness (1 ~ 15; Default: 12)
Contrast (0 ~ 30; Default: 15)
Color (0 ~ 30; Default: 15)
Hue (0 ~ 30; Default: 15)