VDR4-DVC Keypad Controller Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed to be used in life-critical situations and must not be used for this purpose. Warning: To prevent fire or shock hazard, do not expose the unit to rain or moisture. Copyright © 2009 Vicon Industries Inc. All rights reserved.
CONTENTS What’s in the box …………………..…………………………………………………………………………….. 2 Warning & Caution ……...………………………………………………………………………………………... 3 General descriptions……….……………………………………………………………………………………... 5 A. General descriptions……………………………………………………………………….…………… 5 B. Features……………………………………………………………………………………………….…. 5 Installation……………………………………………………………………………………………………….…. 6 Part names & functions…………………………………………………………………………………………... 9 A. General description……………………………………………………………………………..…….… 9 B.
WARNING & CAUTION WARNING TO REDUCE THE RISK OF FIRE OR ELECTIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS IN SIDE. REFER SERVICING TO QUALIFILED SERVICE PERSONNEL.
FCC COMPLIANCE STATEMNET INFORMATION TO THE USER : THIS EQUIOMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE. PURSUANT TO PART 15 OF THE FCC RULES, THESE LIMITS ARE DESIGENED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES. USERS.
GENERAL DESCRIPTIONS GENERAL DESCRIPTIONS * Keyboard Controller is DVR & Camera controller and it allows how to operate the functions easily. * This controller controls DVR and Camera such as DVR setup, Playback, PTZ function. * The LCD shows display current status as well as provides a menu to set up operational parameters. * This controller is designed for desktop operation and interface connectors are located in the junction box.
INSTALLATION Open the box and check if all below items are included in the box. . keyboard controller…………...……… 1 . Junction box …………………….……. 1 . 8P RJ45 Modular Cable (2m) ……… 1 1. Jump 2. Junction Box 3. To Key Board (inside box) 5. CAM1,CAM2 6. DVR 1. Jumper setting 2. Junction box 3. Junction box data In/Out port (To Keyboard) 4. Keyboard data In/Out port (To Junction Box) 5. Master RS485 D+/D- (To CAM1, CAM2 ) 6. Slave RS485 D-/D+ (To DVR) -6- 4.
INSTALLATION A. Single DVR configuration 1. Connect RJ45 to the rear of keyboard controller and data on the junction box and plug in DC12V power to DC jack. 2. Connect CAM1 or CAM2 (RS485(D+),RS485(D-)) to Junction box terminal and communication Jack on PTZ camera (Please make sure of polarity) 3. Turn on the power and then you will be on the starting mode 4. Connect DVR (RS485(D+),RS485(D-)) to the Junction box terminal and the RS-485 A port of DVR. Please make sure of the polarity. 5.
INSTALLATION B. Multiple DVR configuration 1. Connect RJ45 to the rear of keyboard controller and data on the junction box and plug in DC12V power to DC jack. 2. Connect CAM1 or CAM2 (RS485(D+),RS485(D-)) to Junction box terminal and communication Jack on PTZ camera (Please make sure of polarity) 3. Turn on the power and then you will be on the starting mode 4. Connect the DVR (RS485(D+),RS485(D-)) to Junction box terminal and the RS-485 A port of DVRs. Please make sure of polarity. 5.
PART NAME & FUNCTIONS A. PART NAME & FUNCTION 4 5 6 9 10 33 11 19 1 17 18 25 23 24 29 30 31 32 3 2 7 8 12 15 13 16 14 21 22 20 27 28 26 1. LCD Display : Displays numeric input system status, 16. SEL: Selects Key(DVR and Key Board setting mode) function status, general status, etc… 17. ZOOM TELE: Camera Zoom Control for Tele 2. Telemetry joystick : Allows precise setting mode control 18. ZOOM WIDE: Camera Zoom Control for Wide of Pan/Tilt/Zoom & Moving to menu 19.
PART NAME & FUNCTION B. PART NAME & FUNCTIONS(REAR SIDE) ⓐ DATA ⓐ Data out port (Connector to communication and power) C.
ACCESS TO THE CAMERA MENU This function is only for the PTZ camera DISPLAY LCD WINDOW A. Initial display 1 2 3 1. Show the selected unit (Camera or DVR) Cam: 001 2400 BPS 2. Show the selected unit address No. (001 ~ 255) Standby… 3. Show the selected baud rate (2400/4800/9600 bps) 4. Show the controller status 4 B. How to select address B-1. How to select address number 1 or 2 of camera. 1 Cam: 001 2400 BPS Standby… or CAM Cam: 001 2400 BPS 2 Standby… Up to 255 B-2.
ACCESS TO THE CAMERA MENU C. Easy preset save and call (In case of cam 1 / 2400 bps) C-1. How to save preset 1 or 2 (1~64, 100~200) After pushing no. 1 or 2, hold PRST for about 2 seconds 1 or 2 PRST Cam: 001 2400 BPS Î 001 Preset Save C-2. After pushing no. 1 or 2, push PRST shortly, it makes PRST work. 1 or 2 Cam: 001 2400 BPS PRST Î 001 Preset D. How to use TOUR function D-1. Using VICON protocol (In case of Cam1/4800 bps) 1. Tour has be to be set by using camera setup Menu. 2.
ACCESS TO THE CAMERA MENU E. How to use PATTERN function E-1. Using VICON protocol (In case of Cam1/4800 bps ) 1. Pattern has to be set by using the camera setup Menu. 2. Generally, Vicon pattern function works by using the specific preset number.( 88 ~ 89 ) 3. After set up the camera pattern, you can operate pattern function calling preset number. 8 8 PRST Cam: 001 4800 BPS Î088 Preset Up to 89 E-2. Using Pelco-D protocol (in case of Cam1/2400 bps ) 1.
ACCESS TO THE DVR MENU H. How to use AUX2 function H-1. How to use AUX2. FRZ AUX2 Cam: 001 2400 BPS Î Aux2 I. Easy Function save and run (In case of cam 1 / 2400 BPS) Function key is useful when you use a lot of cameras. Generally, each camera has been programmed preset positions. If you want to watch each camera’s specific preset position, first you have to select camera and then you should select preset number. It is inconvenient. Function key saves camera number and preset number. I-1.
ACCESS TO THE DVR MENU A. Display Selection (In case of DVR 1 / 9600 bps) A-1. How to use channel sequence Sequential view under live mode : Viewing of all active video input channels sequentially at the selected DVR Dvr: 001 9600 BPS SEQ Î SEQUENCE A-2. How to use single channel display First push channel number ‘n’(1~16), push ENTER, then displays the selected channel . Exceptionally, ‘0’ + ‘ENTER’ works same as ‘MULTI’ n Dvr: 001 9600 BPS ENTER Standby… A-3.
ACCESS TO THE DVR MENU B-3. How to use R.PLAY button Press once to open the menu to search for the recorded files. Under the PTZ control menu, it can be used for decreasing the speed of Pan Tilt, Zoom, Focus. Dvr: 001 9600 BPS R.PLAY ◀ Î R.PLAY B-4. How to use PLAY button Playback button will activate assigned starting position and channel at playback setup of a selected DVR menu. Under PTZ control menu, it can be used for increasing the speed of Pan, Tilt, Zoom, Focus.
ACCESS TO THE DVR MENU B-8. How to use FRZ button Press once to freeze the frame at the live mode. Press again to release. FRZ AUX2 Dvr: 001 9600 BPS Î FREEZE B-9. How to use MISC button There are no buttons for NET, OSD, Audio Mute, HDD, LOG on the keyboard. To substitute these buttons, you may use MISC button. MISC FUNC Dvr: 001 9600 BPS Î MISC C. Matrix function C-1. How to use Matrix button After pushing no.
HOW TO USE KEYBOARD CONTROLLER SETUP MENU When you change the setting value of setup menu, you should enter “9. Save And Exit” How to go setup menu : After pushing no. key 11, SEL key for over 3 seconds 1 1 SEL A. How to use setup menu A-1. As you move joystick up and down, you can go to next menu, move left and right, you can change the value of setting. A-2. Starting display in setup menu. 1. Baud Rate #1 Master 2400 BPS A-3.
HOW TO USE KEYBOARD CONTROLLER SETUP MENU A-6. How to use System Lock function You can use 0~999 by no. key, when you input 000. it is OFF, when you input 001~999, Lock mode works * Lock mode will be active, when keypad and joystick are not used for the set time. 4. System Lock or OFF 4. System Lock 1~999 A-7. How to enter Password -. You can choose 0 up to 999 and push enter key -. When you forget the password, please call to the vendors that you purchased from. 1 ENTER 5. Password ENTER 5.
HOW TO USE KEYBOARD CONTROLLER SETUP MENU A-9. LCD Backlight How to set up LCD Backlight. -. You can change the Always ON, After 10sec, After 20sec, After 30sec, After 60sec by moving Joystick Left and Right 8. LCD Backlight Always ON A-10. How to save and exit by Joystick Left and Right 9. Save And Exit A-11. Exit 10.
EXAMPLES OF CAMERA/DVR SETTING & OPRERATION A. DVR Menu setting A-1. Menu Æ Camera Setup Æ PTZ Setup Model No : PELCO-D or VICON PTZ ID : 0~255 (In case of “0”, it is normally not used) Baud Rate: 9600 A-2. Menu Æ System Setup Æ DVR ID DVR ID : 0 ~ 255(In case of “0”, it is normally not used) B. Keyboard setting (No need to change it because it is set as the default) B-1. Enter Setting mode : “1” +”1”+ ”SEL” (Push “SEL” button in 3 seconds) B-2. Camera control Baud rate : 1.
EXAMPLES OF CAMERA/DVR SETTING & OPRERATION C-2. How to operate camera 1. Select camera : “ 1 ”(Camera ID) + “ CAM ” button 2. Example to operate 2.1 Zoom Tele : “ ZOOM TELE ” button 2.2 IRIS open : “ IRIS OPEN ” button 3. Camera control command button : MENU, ZOOM TELE, ZOOM WIDE, FOCUS NEAR, FOCUS FAR, IRIS OPEN, IRIS CLSE, PRST, PTRN, TOUR, SCAN, FUNC, AUX1, AUX2, JOYSTICK C-3. How to operate Matrix function (When connect a lot of DVRs by using Daisy chain cable) 1.
SPECIFICATION Item Keyboard controller MASTER(for CAM) : RS-485 (2400bps, 4800bps, 9600bps) Communication SLAVE(for DVR) : RS-485 (2400bps, 4800bps, 9600bps) Axis Joystick 3-Axis, Zoom IN/OUT available DC 12V, 110mA Power Consumption Display Type 16 x 2 Character LCD, With Blue Backlight Key Type PC Key board Button Key board Connector Type Junction Box Connector RJ45 8 Pin Modular Cable Master : Terminal Block.
Vicon Industries Ltd European Headquarters Brunel Way Fareham, PO15 5TX United Kingdom +44 (0) 1489 566300 Fax: +44 (0) 1489 566322 UK Northern Office Unit 2, Whitworth Court Manor Farm Road Runcorn Cheshire WA7 1TE Telephone: +44 1928 530420 Fax: +44 1928 530421 Belgium Vicon Industries Planet II - Unit E, Leuvensesteenweg 542 B-1930 Zaventem Belgium Telephone: +32 27128780 Fax: +32 27128781 Spain Vicon Industries Molina de Segura, 3-Local 4 28030 Madrid Spain Telephone: +34 91 301 61 42 Fax: +34 91 773 3