Product specifications

V-CELL-HD Quick Installation Guide
The Video Output can also be used for easy zoom and focus control when adjusting the lens.
Video Outpu
t is restricted to 704x480 (576) resolution.
Note: The optional OSD Controller can be purchased separately.
2.3 Network Connection and IP assignment
The network camera is designed for use on an Ethernet network and requires an IP address for access.
Most networks today have a DHCP server that automatically assigns IP addresses to connected
devices. By factory default, your camera is set to obtain the IP address automatically via DHCP server.
If your network does not have a DHCP server the network camera will use 192.168.1.100 as the
default IP address.
If DHCP is enabled and the product cannot be accessed, run the “Smart Manager” utility on the CD to
search and allocate an IP address to your product or reset the product to the factory default settings
and then perform the installation again.
1. Connect the network camera/device to the network and power up.
2. Start SmartManager utility (Start>All programs>SmartManager>SmartManager); the main
window will display. After a short while any network devices connected to the network will be
displayed in the list.
3.
Select the camera on the list and click right button of the mouse. The pop-up menu displays as
below.
4
. Select Assign IP. The Assign IP window displays. Enter the required IP address.
7