User's Manual

7
When the Configuration software tool is first started, it will automatically search its subnet for any present
VWG. This process takes a few seconds to be accomplished.
When done, a list of VWG present on the subnet will appear. For a VWG to appear on this list, its internal IP
gateway IP address must be set to your network value.
If no VWG show up on your list you can manually enter the IP address of the VWG in the log on page.
The last numeral (n) in the IP address matches the last numeral in the VWG serial number value as indicated
on the label inside the VWG. The default factory user name is: admin. There is no default password. A blank
entry should be used for the first log on.