Selection Guide
28
Wireless integration
The wireless versions of the VT7000 provide a simple yet powerful solution which targets such retrot installations where running new
communication wiring is cost prohibitive. The wireless room controllers can dramatically reduce project installation costs by re-using the
existing control wiring already in place between older electronic thermostats and the terminal equipment. No new network wires are required
since the controllers rely on a fully integrated ZigBee wireless mesh network infrastructure. Connecting wireless VT7000 series devices into
an iBMS network is made easy with two integration methods, either via a gateway or a wireless serial adapter.
Wireless accessories and specifications
Wireless gateway
The VWG-50-5000 gateway connects up to 50 wireless VT7000 devices to an iBMS network using a BACnet MS/TP or BACnet IP connection.
Part Number Description
VWG-50-5000 Wireless gateway*
VWG-PS-AC-1000 Universal AC power supply (100 - 240 Vac to 15 VDC)
* The VWG-50-5000 does not come with a power supply. A VWG-PS power supply will be required for each gateway.
The wireless gateway corresponds to room controllers using proprietary ZigBee wireless (W) communications only.
Mesh topology wireless network
BMS
These wireless gateways can only be used with the VT7000 Series models ending with W.